Teac Cd Z5000 Manually

CD Recorder service manual without schematics: 2014 kB: 1055: TEAC: AG-D8000: HiFi - Teac RW-D250 sch.pdf: 22/10/06: CD Recorder schematics: 869 kB: 1157: TEAC: RW-D250: Teac DV-2120 Power Supply.gif: 08/03/07: Teac DV-2120 Power Supply (Nintaus Model N9320/9321) 78 kB: 1207: Teac: DV-2120: Z3000SMSANSUI.part1.rar: 13/12/07: service manual. Teac CD-Z5000 CD-player While some of the cheap players are overflowing with more or less useless gadgetry, more expensive models like the TEAC CD-Z5000 possess a sensibly pared down selection. The player is rational looking with a centrally mounted loading drawer and controls fitted for basic play operations. Support:: Downloads. Click on a category below to download manuals, software updates and other documents for your TEAC product.

77-20RW89000020

Z

CD-RW890

CD Recorder

OWNER'S MANUAL

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated 'dangerous voltage' within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

2

IMPORTANT SAFETY INSTRUCTIONS

1)Read these instructions.

2)Keep these instructions.

3)Heed all warnings.

4)Follow all instructions.

5)Do not use this apparatus near water.

6)Clean only with dry cloth.

7)Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.

8)Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

9)Do not defeat the safety purpose of the polarized or groundingtype plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10)Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

11)Only use attachments/accessories specified by the manufacturer.

12)Use only with the cart, stand, tripod, bracket, or

table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

13)Unplug this apparatus during lightning storms or when unused for long periods of time.

14)Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

<Do not expose this apparatus to drips or splashes.

<Do not place any objects filled with liquids, such as vases, on the apparatus.

<Do not install this apparatus in a confined space such as a book case or similar unit.

<The apparatus draws nominal non-operating power from the AC outlet with its POWER or STANDBY/ON switch not in the ON position.

<The apparatus should be located close enough to the AC outlet so that you can easily grasp the power cord plug at any time.

<The mains plug is used as the disconnect device, the disconnect device shall remain readily operable.

<If the product uses batteries (including a battery pack or installed batteries), they should not be exposed to sunshine, fire or excessive heat.

<Caution should be taken when using earphones or headphones with the product because excessive sound pressure (volume) from earphones or headphones can cause hearing loss.

WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

CAUTION

<DO NOT REMOVE THE EXTERNAL CASES OR CABINETS TO EXPOSE THE ELECTRONICS. NO USER SERVICEABLE PARTS ARE WITHIN.

<IF YOU ARE EXPERIENCING PROBLEMS WITH THIS PRODUCT, CONTACT TEAC FOR A SERVICE REFERRAL. DO NOT USE THE PRODUCT UNTIL IT HAS BEEN REPAIRED.

<USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.

For U.S.A.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

<Reorient or relocate the equipment and/or the receiving antenna.

<Increase the separation between the equipment and receiver.

<Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

<Consult the dealer or an experienced radio/TV technician for help.

CAUTION

Changes or modifications to this equipments not expressly approved by TEAC CORPORATION for compliance will void the user's warranty.

CLASS II apparatus with double insulation, and no protective earth provided.

This product has been designed and manufactured according to FDA regulations 'title 21, CFR, chapter 1, subchapter J, based on the Radiation Control for Health and Safety Act of 1968', and is classified as class 1 laser product. There is not hazardous invisible laser radiation during operation because invisible laser radiation emitted inside of this product is completely confined in the protective housings.

Teac Cd Z5000 Manually Disk

The label required in this regulation is shown .

For U.S.A.

Optical pickup :

Type: SF-DS1XD

Manufacturer: SANYO ELECTRIC CO., LTD.

Laser output: Less than 1.6 mW (Play) on the objective lens Less than 47 mW (Record) on the objective lens Less than 13 mW (Erase) on the objective lens

Wavelength: 785 nm

3

Contents

Thank you for choosing TEAC. Read this manual carefully to get the best performance from this unit.

Before Using the Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Remote Control Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Unit Functions and Remote Control. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Playback

Basic Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Basics of Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Direct Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Shuffle Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Time Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Repeat Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

A-B Repeat. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Programmed Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Recording

About Recording. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Before Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Synchronous Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Finalize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Unfinalize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Erasing the Last Track (CD-RW) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Erasing All Tracks (CD-RW). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Erasing All Tracks In Refresh Mode (CD-RW) . . . . . . . . . . . . . . . . . . . . . . . . 24

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

4

Before Using the Unit

Read this before attempting any operations.

<The nominal temperature should be between 5°C and 35°C (41°F and 95°F). The CD-RW recorder is more sensitive to extremes of temperature than ordinary CD players.

<Relative humidity should be 30 to 85 percent non condensing.

<As the unit may become warm during operation, always leave sufficient space around the unit for ventilation.

<The voltage supplied to the unit should match the voltage as printed on the rear panel. If you are in any doubt regarding this matter, consult an electrician.

<Choose the installation location of your unit carefully. Avoid placing it in direct sunlight or close to a source of heat. Also avoid locations subject to vibrations and excessive dust, heat, cold or moisture.

<Do not place the unit on an amplifier/receiver.

<Do not open the cabinet as this might result in damage to the circuitry or electrical shock. If a foreign object should get into the unit, contact your dealer or service company.

<When removing the power plug from the wall outlet, always pull directly on the plug, never yank the cord.

<To keep the laser pickup clean, do not touch it and always close the disc tray.

<Do not attempt to clean the unit with chemical solvents as this might damage the finish. Use a clean, dry cloth.

<Keep this manual in a safe place for future reference.

<Do not tilt the main unit while a disc is inserted. Doing so may cause a malfunction.

DO NOT MOVE THE UNIT DURING PLAYBACK/RECORDING

During playback or recording, the disc rotates at high speed. Do NOT lift or move the unit during playback or recording. Doing so may damage the disc or the unit.

WHEN MOVING THIS UNIT

When changing the unit's location or packing the unit for moving, be sure to remove the disc. Moving this unit with the disc loaded may result in damage to this unit.

CAUTION:

<Switch off the power to all equipment before making connections.

<Read the instructions of each component you intend to use with this unit.

<Be sure to insert each plug securely. To prevent hum and noise, avoid bundling the signal interconnection cables together with the AC power cord.

CD-RW890

AB

C

AC Outlet

A DIGITAL IN terminal

To record digital audio signals, connect this terminal to the digital output terminal of a digital device such as a CD player with a commercially available optical digital cable.

< Keep the supplied cap to cover the terminal when it is not in use.

B ANALOG IN/OUT jacks

Analog 2-channel audio signal is input or output from these jacks. Connect these jacks to the amplifier with RCA cables.

CD-RW890 Amplifier

ANALOG OUT q CD-R (TAPE) PLAY

ANALOG IN q CD-R (TAPE) REC

Make sure to connect:

white plug q white jack (L: left channel) red plug q red jack (R: right channel)

C AC Power Cord

After all other connections are complete, connect the plug to the AC wall socket.

Be sure to connect the power cord to an AC outlet which supplies the correct voltage. Hold the power plug when plugging or unplugging the power cord. Never pull or yank on the power cord.

< If the unit will not be used for a long period of time, unplug the power cord.

Playable discs

Please use CD discs bearing the 'COMPACT disc DIGITAL AUDIO' logo.

CD-R and CD-RW discs properly recorded and finalized in audio CD format.

The main unit can play the above discs without an adapter. Other discs are not available.

If you attempt to play discs other than the above, a loud noise may occur to damage the speakers or your hearing. Do not play such discs.

<Copy-protected discs, DualDiscs and other discs which do not conform to the CD standard may not play back correctly in this player. If you use such discs in this unit, TEAC Corporation and its subsidiaries cannot be responsible for any consequences or guarantee the quality of reproduction. If you experience problems with such non-standard discs, you should contact the producers of the disc.

About CD-R and CD-RW discs

The main unit can play CD-R and CD-RW discs recorded in audio CD format (CD-DA).

<Remember to finalize a disc recorded with the CD recorder.

<Depending on the quality of the disc and/or the condition of the recording, some CD-R/CD-RW discs may not be playable.

<If you are in any doubt as to the care and handling of a CD-R/ CD-RW disc, read the precautions supplied with the disc, or contact the disc manufacturer directly.

Recordable discs

CD-R and CD-RW discs bearing the 'DIGITAL AUDIO' logo

Cautions for use

<Do not use cracked discs as doing so may cause a malfunction.

<Printable CD-R and CD-RW discs are not recommended, as the label side might be sticky and damage the unit.

<Do not stick papers or protective sheets on the discs and do not use any protective coating spray.

<Use a soft oil-based felt-tipped pen to write the information on the label side. Never use a ball-point or hard-tipped pen, as this may cause damage to the recorded side.

<Never use a stabilizer. Using commercially available CD stabilizers with this unit will damage the mechanism and cause them to malfunction.

<Do not use CDs with an irregular shape (octagonal, heart shaped, business card size, etc.). CDs of this sort can damage the unit:

Handling disc

<Always place the disc on the disc tray with the label side uppermost. (Compact discs can be played or recorded only on one side.)

<Scratches, fingerprints, dirt, etc. on the signal recording surface (without labels) may cause a playback error. Be careful when handling.

<To remove a disc from its storage case, press down on the center of the case and lift the disc out, holding it carefully by the edges.

Storing disc

<Discs should be returned to their cases after use to avoid dust and scratches that could cause the laser pickup to 'skip'.

<Do not expose discs to direct sunlight or high humidity and temperature for extended periods. Long exposure to high temperatures will warp the disc.

<CD-R and CD-RW discs are more sensitive to the effects of heat and ultraviolet rays than ordinary CDs. It is important that they are not stored in a location where direct sunlight will fall on them, and away from sources of heat such as radiators or heat-generating electrical devices.

<Dirt on the disc may cause the sound to skip or lower the sound quality. Always keep it clean when storing.

Maintenance

<Should the disc become dirty, wipe the surface radially (from the center hole outward towards the outer edge) with a soft, dry cloth:

<Never use such chemicals as record sprays, antistatic sprays or fluid, benzine or thinner to clean the discs. Such chemicals will do irreparable damage to the disc's plastic surface.

Remote Control Unit

The provided remote control unit allows the unit to be operated from a distance. When operating the remote control unit, point it towards the REMOTE SENSOR on the front panel of the unit.

<Even if the remote control unit is operated within the effective range, remote control operation may be impossible if there are any obstacles between the unit and the remote control.

<The remote control may not work if the remote sensor is exposed to direct sunlight or electric lighting. In this case, move the main unit.

<If the remote control unit is operated near other appliances which generate infrared rays, or if other remote control devices using infrared rays are used near the unit, it may operate incorrectly. Conversely, the other appliances may operate incorrectly.

Battery Installation

Remove the battery compartment cover.

Insert two 'AA' (R6, SUM-3) dry batteries. Make sure that the batteries are inserted with their positive '+' and negative'_' poles positioned correctly.

Close the cover.

Battery Replacement

If the distance required between the remote control unit and main unit decreases, the batteries are exhausted. In this case replace the batteries with new ones.

For more information about collection of batteries, please contact your local municipality, your waste disposal service or the point of sale where you purchased the items.

Precautions concerning batteries

Misuse of batteries could cause them to rupture or leak leading to fire, injury or the staining of nearby things. Please read and observe the following precautions carefully.

<Be sure to insert the batteries with correct positive '+' and negative '_' polarities.

<Use batteries of the same type. Never use different types of batteries together.

<Rechargeable and non-rechargeable batteries can be used. Refer to the precautions on their labels.

<When the remote control unit is not to be used for a long time (more than a month), remove the batteries from the remote control unit to prevent them from leaking. If they leak, wipe away the liquid inside the battery compartment and replace the batteries with new ones.

<Do not heat or disassemble batteries and never dispose of old batteries by throwing them in a fire.

<Do not carry or store batteries with metal accessories. Doing so may cause short-circuiting, leakage, breakage, etc.

7

d

a e

f

g

b h

Main unit and Remote control unit

POWER

Press this button to turn the unit on or off.

Display

The total number of the tracks, the total play time of the disc, etc. are displayed.

Disc Tray

OPEN/CLOSE (L)

Use this button to open and close the disc tray.

MUSIC SKIP (.//)

Use these buttons to skip tracks.

Hold down these buttons to search for a part of a track.

Play (y)

Teac Cd Z5000 Manually To Iphone

Use this button to start playback, recording, finalizing, unfinalizing and erasing.

Pause (J)

Use this button to pause playback or recording.

Stop (H)

Use this button to stop playback or recording.

RECORD

Use this button to enter record pause mode. During recording, use this button to divide tracks.

REC LEVEL

Use these buttons to adjust the analog recording level.

PHONES

For private listening, first reduce the volume level to minimum. Then insert the plug from your headphones into the PHONES jack, and adjust the volume by turning the LEVEL knob.

INPUT SELECT

Use this button to select a source to be recorded.

AUTO/MANUAL

Use this button to select the mode of track number assignment.

SYNC 1/ALL

Teac Cd Z5000 Manually Battery

Use this button for digital synchronized recording.

FINALIZE

Use this button to finalize a CD-R/CD-RW disc.

ERASE

Use this button to erase or unfinalize a CD-RW disc.

REMOTE SENSOR

When operating the remote control unit, point it towards the REMOTE SENSOR.

Only on Remote control unit

aNumeric buttons

Use these buttons to select track numbers.

bREPEAT (1/ALL, A-B)

Use these buttons to select a repeat mode.

cSearch (m/,)

Teac Cd Z5000 Manually Cassette

Use these buttons to search for a part of a track.

dTIME

Use this button to change the display mode.

ePROGRAM

Use this button to program tracks.

fCLEAR

Use this button to clear programmed tracks.

gPROGRAM CHECK

Use this button to check the programmed contents.

hSHUFFLE

Use this button for shuffle playback.

iSkip (.//)

Use these buttons to skip tracks.

Note:

To simplify explanations, instructions in this manual refer to the names of the buttons and controls on the front panel only. Associated controls on the remote control will also operate similarly.

9

97 Teac CD Player Manuals and User Guides (199 Models) were found in All-Guides Database

Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Remote Control Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Unit Functions and Remote Control. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

MICROMASTER 420 Operating Instructions 10 6SE6400-5AA00-0BP0 Repair WARNING ♦ Repairs on equipment may only be carried out by Siemens Service, by repair centers authorized by Siemens or by qualified personnel who are thoroughly acquainted with all the warnings and operating procedures contained in this manual. MICROMASTER 420 Documentation Getting Started Guide Is for quick commissioning with SDP and BOP. Operating Instructions Gives information about features of the MICROMASTER 420, Installation, Commissioning, Control modes, System Parameter structure, Troubleshooting, Specifications and available options of the MICROMASTER 420. Suggestions and/or Corrections Suggestions Siemens AG Automation & Drives Group Corrections SD VM 4 Postfach 3269 For Publication/Manual: D-91050 Erlangen MICROMASTER 420 Bundesrepublik Deutschland Email: Technical.documentation@con.siemens.co.uk User Documentation Operating Instructions From Order Number: Name: 6SE6400-5AA00-0BP0 Date of Issue. 6SE6420-2UC17-5AA1 MICROMASTER 420 MICROMASTER 420 without filter 200-240 V 1/3 AC+10/-10% 47-63 Hz Constant torque 0.75 kW Overload 150% for 60s Square-law torque 0.75 kW 173x 73x 149 (HxWxD) Degree of protection IP20 Ambient temperature -10+50 °C without AOP/BOP.

Playback

Basic Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Basics of Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Direct Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Shuffle Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Time Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Repeat Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

A-B Repeat. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Programmed Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Recording

About Recording. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Before Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Synchronous Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Finalize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Unfinalize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Erasing the Last Track (CD-RW) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Erasing All Tracks (CD-RW). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Erasing All Tracks In Refresh Mode (CD-RW) . . . . . . . . . . . . . . . . . . . . . . . . 24

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

4

Before Using the Unit

Read this before attempting any operations.

<The nominal temperature should be between 5°C and 35°C (41°F and 95°F). The CD-RW recorder is more sensitive to extremes of temperature than ordinary CD players.

<Relative humidity should be 30 to 85 percent non condensing.

<As the unit may become warm during operation, always leave sufficient space around the unit for ventilation.

<The voltage supplied to the unit should match the voltage as printed on the rear panel. If you are in any doubt regarding this matter, consult an electrician.

<Choose the installation location of your unit carefully. Avoid placing it in direct sunlight or close to a source of heat. Also avoid locations subject to vibrations and excessive dust, heat, cold or moisture.

<Do not place the unit on an amplifier/receiver.

<Do not open the cabinet as this might result in damage to the circuitry or electrical shock. If a foreign object should get into the unit, contact your dealer or service company.

<When removing the power plug from the wall outlet, always pull directly on the plug, never yank the cord.

<To keep the laser pickup clean, do not touch it and always close the disc tray.

<Do not attempt to clean the unit with chemical solvents as this might damage the finish. Use a clean, dry cloth.

<Keep this manual in a safe place for future reference.

<Do not tilt the main unit while a disc is inserted. Doing so may cause a malfunction.

DO NOT MOVE THE UNIT DURING PLAYBACK/RECORDING

During playback or recording, the disc rotates at high speed. Do NOT lift or move the unit during playback or recording. Doing so may damage the disc or the unit.

WHEN MOVING THIS UNIT

When changing the unit's location or packing the unit for moving, be sure to remove the disc. Moving this unit with the disc loaded may result in damage to this unit.

CAUTION:

<Switch off the power to all equipment before making connections.

<Read the instructions of each component you intend to use with this unit.

<Be sure to insert each plug securely. To prevent hum and noise, avoid bundling the signal interconnection cables together with the AC power cord.

CD-RW890

AB

C

AC Outlet

A DIGITAL IN terminal

To record digital audio signals, connect this terminal to the digital output terminal of a digital device such as a CD player with a commercially available optical digital cable.

< Keep the supplied cap to cover the terminal when it is not in use.

B ANALOG IN/OUT jacks

Analog 2-channel audio signal is input or output from these jacks. Connect these jacks to the amplifier with RCA cables.

CD-RW890 Amplifier

ANALOG OUT q CD-R (TAPE) PLAY

ANALOG IN q CD-R (TAPE) REC

Make sure to connect:

white plug q white jack (L: left channel) red plug q red jack (R: right channel)

C AC Power Cord

After all other connections are complete, connect the plug to the AC wall socket.

Be sure to connect the power cord to an AC outlet which supplies the correct voltage. Hold the power plug when plugging or unplugging the power cord. Never pull or yank on the power cord.

< If the unit will not be used for a long period of time, unplug the power cord.

Playable discs

Please use CD discs bearing the 'COMPACT disc DIGITAL AUDIO' logo.

CD-R and CD-RW discs properly recorded and finalized in audio CD format.

The main unit can play the above discs without an adapter. Other discs are not available.

If you attempt to play discs other than the above, a loud noise may occur to damage the speakers or your hearing. Do not play such discs.

<Copy-protected discs, DualDiscs and other discs which do not conform to the CD standard may not play back correctly in this player. If you use such discs in this unit, TEAC Corporation and its subsidiaries cannot be responsible for any consequences or guarantee the quality of reproduction. If you experience problems with such non-standard discs, you should contact the producers of the disc.

About CD-R and CD-RW discs

The main unit can play CD-R and CD-RW discs recorded in audio CD format (CD-DA).

<Remember to finalize a disc recorded with the CD recorder.

<Depending on the quality of the disc and/or the condition of the recording, some CD-R/CD-RW discs may not be playable.

<If you are in any doubt as to the care and handling of a CD-R/ CD-RW disc, read the precautions supplied with the disc, or contact the disc manufacturer directly.

Recordable discs

CD-R and CD-RW discs bearing the 'DIGITAL AUDIO' logo

Cautions for use

<Do not use cracked discs as doing so may cause a malfunction.

<Printable CD-R and CD-RW discs are not recommended, as the label side might be sticky and damage the unit.

<Do not stick papers or protective sheets on the discs and do not use any protective coating spray.

<Use a soft oil-based felt-tipped pen to write the information on the label side. Never use a ball-point or hard-tipped pen, as this may cause damage to the recorded side.

<Never use a stabilizer. Using commercially available CD stabilizers with this unit will damage the mechanism and cause them to malfunction.

<Do not use CDs with an irregular shape (octagonal, heart shaped, business card size, etc.). CDs of this sort can damage the unit:

Handling disc

<Always place the disc on the disc tray with the label side uppermost. (Compact discs can be played or recorded only on one side.)

<Scratches, fingerprints, dirt, etc. on the signal recording surface (without labels) may cause a playback error. Be careful when handling.

<To remove a disc from its storage case, press down on the center of the case and lift the disc out, holding it carefully by the edges.

Storing disc

<Discs should be returned to their cases after use to avoid dust and scratches that could cause the laser pickup to 'skip'.

<Do not expose discs to direct sunlight or high humidity and temperature for extended periods. Long exposure to high temperatures will warp the disc.

<CD-R and CD-RW discs are more sensitive to the effects of heat and ultraviolet rays than ordinary CDs. It is important that they are not stored in a location where direct sunlight will fall on them, and away from sources of heat such as radiators or heat-generating electrical devices.

<Dirt on the disc may cause the sound to skip or lower the sound quality. Always keep it clean when storing.

Maintenance

<Should the disc become dirty, wipe the surface radially (from the center hole outward towards the outer edge) with a soft, dry cloth:

<Never use such chemicals as record sprays, antistatic sprays or fluid, benzine or thinner to clean the discs. Such chemicals will do irreparable damage to the disc's plastic surface.

Remote Control Unit

The provided remote control unit allows the unit to be operated from a distance. When operating the remote control unit, point it towards the REMOTE SENSOR on the front panel of the unit.

<Even if the remote control unit is operated within the effective range, remote control operation may be impossible if there are any obstacles between the unit and the remote control.

<The remote control may not work if the remote sensor is exposed to direct sunlight or electric lighting. In this case, move the main unit.

<If the remote control unit is operated near other appliances which generate infrared rays, or if other remote control devices using infrared rays are used near the unit, it may operate incorrectly. Conversely, the other appliances may operate incorrectly.

Battery Installation

Remove the battery compartment cover.

Insert two 'AA' (R6, SUM-3) dry batteries. Make sure that the batteries are inserted with their positive '+' and negative'_' poles positioned correctly.

Close the cover.

Battery Replacement

If the distance required between the remote control unit and main unit decreases, the batteries are exhausted. In this case replace the batteries with new ones.

For more information about collection of batteries, please contact your local municipality, your waste disposal service or the point of sale where you purchased the items.

Precautions concerning batteries

Misuse of batteries could cause them to rupture or leak leading to fire, injury or the staining of nearby things. Please read and observe the following precautions carefully.

<Be sure to insert the batteries with correct positive '+' and negative '_' polarities.

<Use batteries of the same type. Never use different types of batteries together.

<Rechargeable and non-rechargeable batteries can be used. Refer to the precautions on their labels.

<When the remote control unit is not to be used for a long time (more than a month), remove the batteries from the remote control unit to prevent them from leaking. If they leak, wipe away the liquid inside the battery compartment and replace the batteries with new ones.

<Do not heat or disassemble batteries and never dispose of old batteries by throwing them in a fire.

<Do not carry or store batteries with metal accessories. Doing so may cause short-circuiting, leakage, breakage, etc.

7

d

a e

f

g

b h

Main unit and Remote control unit

POWER

Press this button to turn the unit on or off.

Display

The total number of the tracks, the total play time of the disc, etc. are displayed.

Disc Tray

OPEN/CLOSE (L)

Use this button to open and close the disc tray.

MUSIC SKIP (.//)

Use these buttons to skip tracks.

Hold down these buttons to search for a part of a track.

Play (y)

Teac Cd Z5000 Manually To Iphone

Use this button to start playback, recording, finalizing, unfinalizing and erasing.

Pause (J)

Use this button to pause playback or recording.

Stop (H)

Use this button to stop playback or recording.

RECORD

Use this button to enter record pause mode. During recording, use this button to divide tracks.

REC LEVEL

Use these buttons to adjust the analog recording level.

PHONES

For private listening, first reduce the volume level to minimum. Then insert the plug from your headphones into the PHONES jack, and adjust the volume by turning the LEVEL knob.

INPUT SELECT

Use this button to select a source to be recorded.

AUTO/MANUAL

Use this button to select the mode of track number assignment.

SYNC 1/ALL

Teac Cd Z5000 Manually Battery

Use this button for digital synchronized recording.

FINALIZE

Use this button to finalize a CD-R/CD-RW disc.

ERASE

Use this button to erase or unfinalize a CD-RW disc.

REMOTE SENSOR

When operating the remote control unit, point it towards the REMOTE SENSOR.

Only on Remote control unit

aNumeric buttons

Use these buttons to select track numbers.

bREPEAT (1/ALL, A-B)

Use these buttons to select a repeat mode.

cSearch (m/,)

Teac Cd Z5000 Manually Cassette

Use these buttons to search for a part of a track.

dTIME

Use this button to change the display mode.

ePROGRAM

Use this button to program tracks.

fCLEAR

Use this button to clear programmed tracks.

gPROGRAM CHECK

Use this button to check the programmed contents.

hSHUFFLE

Use this button for shuffle playback.

iSkip (.//)

Use these buttons to skip tracks.

Note:

To simplify explanations, instructions in this manual refer to the names of the buttons and controls on the front panel only. Associated controls on the remote control will also operate similarly.

9

97 Teac CD Player Manuals and User Guides (199 Models) were found in All-Guides Database

Teac CD Player: List of Devices

Teac CD Player: Popular and Often Search Manuals

• Teac CD Player PD-301

  Teac CD Player Owner's manual (96 pages)

• Teac CD Player PCD807

  Teac CD Player Operation & user's manual (12 pages)

• Teac CD Player EX-CD3

  Teac CD Player Service manual (32 pages)

• Teac CD Player GF450K7

  Teac CD Player Specification sheet (1 pages)

• Teac CD Player PC-D825

  Teac CD Player Owner's manual (9 pages)

• Teac CD Player SL-D90

  Teac CD Player Service manual (35 pages)

• Teac CD Player PDH300MKIII

  Teac CD Player Owner's manual (5 pages)

• Teac CD Player CD-P650

  Teac CD Player Owner's manual (76 pages)

• Teac CD Player PD-H300mkIIM

  Teac CD Player Owner's manual (44 pages)

• Teac CD Player AG-H600NTZ

  Teac CD Player Setup information (2 pages)

• Teac CD Player CD-P1260

  Teac CD Player Owner's manual (52 pages)

• Teac CD Player CD-P1440R

  Teac CD Player Service manual (11 pages)

• Teac CD Player PC-D890M

  Teac CD Player Instruction manual (6 pages)

• Teac CD Player SR-L35CD

  Teac CD Player Owner's manual (40 pages)

• Teac CD Player X-01

  Teac CD Player Owner's manual (64 pages)

• Teac CD Player CR-H238I

  Teac CD Player Owner's manual (44 pages)

• Teac CD Player CD-P1850

  Teac CD Player Service manual (16 pages)

• Teac CD Player SL-D910

  Teac CD Player Service manual (36 pages)

• Teac CD Player PD-H300mkIIM

  Teac CD Player Service manual (15 pages)

• Teac CD Player PD-D2610

  Teac CD Player Owner's manual (40 pages)

• Teac CD Player CD-P1450

  Teac CD Player Service manual (17 pages)

• Teac CD Player Esoteric K-05

  Teac CD Player Specifications (2 pages)

• Teac CD Player PC-D803

  Teac CD Player Owner's manual (8 pages)

• Teac CD Player Esoteric K-05

  Teac CD Player Owner's manual (36 pages)

• Teac CD Player CD-H750

  Teac CD Player Owner's manual (188 pages)